AccuSpark 8mm Performance Silicone Ignition HT Lead /Wire/Cable,Red,Blue Plus

AccuSpark 8mm Performance Silicone Ignition HT Lead /Wire/Cable,Red,Blue Plus

  In this pack, you will receive your selected number of Meters    from one continuous roll of HT wire MAKING YOUR OWN HT LEADS.        What You Need.       x Meters of HT Wire       x Number of Sparkplug Boots & Contacts       x Number of distributor Boots & Contacts       A Pair of Pliers or crimping tool       What To Do.          Follow link below for a YouTube Demo Video           http://www.youtube.com/watch?v=7QuGG7wIGj0                  Cut HT wire to the desired length, insert metal spike down the centre of the HT wire push in about half way and bend over.       Crimp Contact to HT Wire using pliers making sure you have a connection between the boot contact and metal spike.            Once your boot is crimped on you HT lead take your rubber boot spray with a lubricant WD40 works best, slide rubber boot over metal contact.       When Fitting 90° Distributor boot you must put the rubber boot on before you crimp on your contact.       Follow these simple steps and you'll be making HT Leads from your bedroom before you know it

Write a review

Note: HTML is not translated!
    Bad           Good
  • Views: 13
  • Product Code:
  • Availability: In Stock
0 Product(s) Sold
  • $1.90
  • Ex Tax: $1.90